There are micro-friends through the public number background consultation, said that the new home has just been decorated, just cleaning, but found a good tile, several places have broken corners and avalanche, asked how small knitting?
We believe that there are several reasons for breaking corners or breaking the edges of newly laid tiles:
Ceramic tiles in the transport, handling process, inadvertently resulting in broken corner collapse. This kind of situation is often encountered, ceramic tile is relatively hard, although have packing well, but in the transportation and handling process, there will inevitably be bumps and bumps, that for this kind of situation, the general muddy master in the paving, can discover and deal with in time.
Treatment: if the number of broken kernels is not large, the mudmaster should break the corner of the brick, pick out, spread on the edge corner. If you open the package to find a large number of broken kernels, it should inform the owner in time, let the owner contact the merchant to replace the brick.
Generally speaking, the master is not able to break the edge of the brick spread down, if the master still such a broken edge of the brick, then the responsibility should be borne by the construction master.
Ceramic tile in the process of paving, it is inevitable to spread to the edge corner, to cut small pieces to pave, some masters accidentally cut the brick broken corner or broken edge.
If there is a small edge cut it is normal, the master can use a corner grinder or sandpaper to polish, but if there are large broken corners or broken edge, that can not be laid down. At this time, if the broken corner collapse of brick down, it is the responsibility of the construction master.
After the tile is laid, the tile surface is not protected, and other construction procedures are followed, such as: wooden work, ceiling, installation of toilet faucet, etc.
In order to avoid this situation as far as possible, it is suggested to use professional ceramic tile protective film to protect the tile after laying and pasting.
Paving tile, in filling or cleaning, resulting in tile broken corner or broken edge.
After we have laid the tile, we usually fill in the seam. When we clean up after filling, many people are used to shoveling the surface of the tile with a shovel, and when cleaning, they also often use the blade to shovel, if not carefully. It is also easy to break the edge of the brick. The liability for this situation rests with the jointing construction side.
The cause of the tiles themselves, resulting in broken corners or broken edges.
It should be stressed that this situation is rare, even if the quality of this tile is extremely poor, generally also cause the tile glaze crack or direct fracture, generally do not cause broken corner or broken edge. If is ceramic tile itself quality problem, that responsibility is borne by merchant (manufacturer) of course, however, this kind of circumstance is really very few!
What about broken corners?
After tile paving, found that there are broken corner collapse, in addition to accountability, of course, or to remedy the treatment. This is the case for wall tiles, if not very serious, can be easily remedied with tile patching (tile plaster). (buy the patch to search for a treasure.)
This is the case with floor tiles. In places where they do not move regularly, they can be patched with a patch. But for places where they often walk, then Roman suggests that you change bricks, because after the patching paste has been put on it, you can walk more on it. It will fall off, too.
All right, that's the answer to the problem of the broken corner or the broken edge of the ceramic tile.For more home solutions, pay quick attention to Romantic tiles, the official WeChat public or the private letter contact Elizabeth!